RetroChallenge #1, part 1
My First Challenge, as you may remember, is to fully load an AcerNote730i laptop, with software to match it’s manufacture date of 1995.
I guess I can divide it in three.
1) Choose the software,
2) Get the software, and
3) Load the software.
Even if the computer is from 1995, Windows 95 is clearly out of the question.
Windows 3.1 should not be a problem, perhaps with the computer booting to DOS, and loading Windows manually when needed.
X-Tree was one of my favorite programs back in the day, and it will find its way in there.
Norton Utilities, or at least Norton Disk Doctor should also be there.
Other programs that I used back in the day were Quattro Pro, Arj, Compushow…
Some games must also be there. Maniac Mansion, Master of Orion and Doom seem like a good way to start.
Getting the software should not be that hard. I still have copies of some of the one I was using back in the 90’s, and sites like “Vetusware” make it relatively easy to find almost anything from that time period.
The real challenge will be to get the software into the computer. As I mentioned before, it has no PCMCIA slot, nor network card. That leaves only the serial port and the floppy drive.
I do have a P-III with a floppy drive, and I could get the software to it from either a CD or a CF card reader. But I have not used the floppy drive in years…
And to use the serial port, I will fist need to get a terminal program into the laptop, so I would still need to use the floppy drive for that.
Well, I guess my next step will be to test that floppy drive, the few disks I still have around, and perhaps try to get a few more from somewhere. Let’s see how it goes.