I guess I shouldn’t…. After all, there are just 6 days left…
What the heck, I do consider challenge #3 achieved, with 2 Remixed games.
And my long term goal, beyond retrochallenge, is to remix over a dozen of games, so, the next one in the list is “Sup-Caza”. The name comes from “Super Cazalo”, translated roughly to “Super Catch-it”, with the original being a 32×16 resolution game with 1×1 blocks as characters.
After a quick look at the code, (1600 bytes), it was clear that I could use PCOPY to avoid screen flicker.
Here is the original routine to draw and clear the graphics.
274 FOR A=1 TO 100:NEXT A
275 COLOR 1
The wait loop in 274 is to keep the characters visible in the screen for at least some time. I would have assumed that by that time I knew to put all the math between drawing and erasing, but I guess I did not.
Anyway, with page flipping, a simple PCLS is more than enough to clear the graphics, and faster than drawing 3 background colored boxes on top of the characters.
The next thought was to use the variables to store the actual character position in the screen, instead of the positions in the grid and doing math in all the loops.
Then, as the sprites are not the same size, I adjusted their positions so they looked centered in the grid squares, instead of “hanging from the corner”. That is, H starts at 2 instead of at 0 to center the 9 pixels sprite in the 12 pixel grid square.
But, that broke collision detection, since now the player’s H would never match the monster’s X
There are 3 ways to fix this. Doing additional math, with is kind of a waste, use a grid and array to store position – for example, X going from 0 to 20 and storing the screen coordinates for each position in X(19), or redo graphics to make them all the same size, which will affect the look of the game, and probably take more time. Also… who knows if I can get all the characters fit nicely in 12×12?
I guess I could do a mock-up to see… OK this looks good… Damn! I am doing the new graphics
Welllllll, I hope it rains next weekend.
Yes! “Hippo Teeth” is completed!
well, there wasn’t that much left to do, mostly, get the “play again” option working.
The simplest way to do this is, of course, to run the program again, which would be fine since I’m not keeping a high score.
But, as I mentioned before, the background image is being loaded as a file. If you are running an emulator, or using any hard drive solution, this is probably fine, but for a floppy disk system, or even worst, a tape one, a better solution had to be used.
It was then that I remembered that the (C)LOADM command accepts an additional parameter, offset. Using this, I could LOADM the background to the memory range 1537 – 2049, normally used for the high-res modes. Then, at any time, it was just a matter of copying the memory content from there to the 1024-1536 range to have it “loaded” in the visible text screen.
As simple as FOR A=1537 TO 2049:POKE A-513,PEEK(A):NEXT
Then, I needed to restore the vertical position of the worm to the original one. As this is stored in a 3×3 array (3 possible horizontal positions, 3 lines in the graphic) with values that are READ from a DATA statement, RESTORE was clearly an option. I decided to use it, and basically reinitialize the game, going back to the first lines used to set the game variables.
This saved the space that would have been needed to reset the variables somewhere else in the code (I’m still thinking about eventually making a 4 KB version). A CLEAR was needed to make sure all was reset, but also keeps me from implementing a high score or something similar.
Eventually, by rearranging the order in which the variables are initialized, I will probably be able to have a high score list, and some other nice things. I wonder if the game is worth it?
The next step was to tweak the sounds a bit. I have been using the SOUND command, and for a while, I thought about replacing it with PLAY, since I could use just one PLAY to play multiple SOUNDs, saving some space.
I was surprised to find that SOUND can produce higher pitched sounds than PLAY, and PLAY goes lower than SOUND. After going around for a while trying to find the equivalent PLAY to the SOUNDs I was using, I realized that in a CoCo with Extended BASIC (the one that has PLAY), I would have 16 KB as minimum, so saving a few bytes by using a command that would not be available in the 4 KB machines did not make much sense.
Just in case anyone is curious, The closest PLAY equivalent I got to SOUND 150,1:SOUND 100,1:SOUND 50,1 was PLAY”O3L16GC+O2A-“.
Finally, I started compacting the code the usual way. Merging multiple lines in one, removing spaces and remarks, etc. I went from 70 lines with 3825 characters (according to Notepad++), to 37 lines with 3309 characters. Not bad at all.
I kept a copy of the “uncompacted” code, as it will make it easier to work with it in the future.
Well, that is it. The game is ready!
As the gameplay has not changed at all from what is seen in the previous video, I will leave you with the game’s code, the background code, and a DSK file, ready to play.
Looks like I could say “It is finished¨. Of course, anyone who ever wrote a computer program knows that you are never finished, but, at least I can say that “Russian Roulette” has been properly “Remixed”.
As I mentioned before, there were only 2 tasks left. I tackled the sound first, and even when the results are not great – there is no way to generate noise from BASIC in the CoCo – I think that they are at least acceptable.
For the “Bang” sound, I changed the original PLAY”V30O2L32CF”, just 2 notes in the 2nd low octave, to V30O1L254T254ACDEFAV20ACDBV10FACD. That is 14 notes in the lowest octave, as short as possible, arranged in a somewhat random fashion to simulate noise. There is also a slight “fade-out” effect by changing the volume from V30 to V20 and finally to V10 while playing.
The “Click” went from PLAY”O5L64;12″ – a single high pitched note – to O5L96T4BABB. Not a great deal, but at least a bit better.
In the original, the sounds will only be played in one place in the code. But as I added computer “players” that can also Click and Bang, I used an alphanumeric variable to store the PLAY string, to save me from typing the whole Bang sound twice.
For the ending, I wanted to do something a little bit fancy, but without going crazy.
I thought about changing the color assigned to the palette entry for the background to do a kind of “fade out” effect, but in the end I went for a kind of wipe-out.
Using 2 FOR/NEXT loops to print spaces with a different background color than the one already on the screen was very simple, and I went to use 2 PRINT statements. One would go from top left to halfway down, and the other from bottom right to halfway up.
But something was not working. For whatever reason, I’ve always ended up with a space in the original background color on the top left.
Eventually, I realized that, regardless of what was PRINTed on the screen, an extra character with the cursor would be placed right after it. Therefore, when I was printing in the bottom right corner (39,23), that extra character would print in the next line, causing the whole text screen to scroll up. This, in turn moved the 2nd top line up (still in the original background color), and caused that “leftover” character.
Since the computer was actually printing 2 characters for each PRINT command, and I should not print on the last position, I changed the loop that tracks the horizontal position to use STEP 2, and to go only up to 38, ending up with this:
510 FOR V=0 TO 11:FOR X=0 TO 38 STEP 2:LOCATE 39-X,23-V:ATTR 0,0:PRINT” “;:LOCATE X,V:PRINT” “;:NEXT X,V
And finally, the simple trick of printing one character at a time for the final message.
520 LOCATE 6,10:FORX=1 TO 25:PRINTMID$(“You are the last survivor”,X,1);:FORL=1 TO 30:NEXT L,X
The reason I did not use the palette fading effect was that I thought to use it for the “death” screen.
In the original, I switched one of the low res screens, set a blue background, and then painted it red from top to bottom by drawing lines.
1130 WIDTH 32:PMODE 1,1:SCREEN 1,0:PCLS 3
1135 COLOR 4
1140 FOR A=0 TO 192 STEP 2:LINE(0,A)-(256,A),PSET
I guess I was trying to do something like a veil of blood falling over the player’s eyes…
Looking for colors that would work for a fade from the magenta background to red, I realized that there were not really too many. By changing the default background to a darker shade, I was able to get another one, which is kind of enough for the effect to work.
340 FOR A=1 TO 5:READ P:PALETTE 6,P:FOR W=1 TO 100:NEXTW,A
350 DATA 9,8,7,6,5
Well, that’s it. A second game remixed. I leave you with some screenshots and the listings for both, the original and remixed versions.
Ooooppsss! I just figured something out. More than a few times, when it’s the player’s turn, the game will just react as if a key had been pressed, and move on. This seems to be because any key pressed after the INKEY$ is stored in a buffer, and goes is used later. Adding an extra, bogus INKEY$ seems to have taken care of this.
95 A$=INKEY$:IF A$=”” GOTO 95
After finishing the “Aliens” Remix, the next game in my list of candidates for a remix may seem a bit odd.
It is probably quite clear, even without a translator at hand, that “Ruleta Rusa” is a simple text based “Russian Roulette” simulation – let’s not call it “game”.
When you run the program, you are told just “It is chamber #1”. When you press a key, it is either “!-CLICK-!” or…. “!!!BANG!!!”.
If you are still alive, then you are also told that you won an extra $10, and now have a total of $40.
But there are a few extra things that you should be told before starting.
You clearly start with $30, and besides making you… not rich, the money can be used to spin the gun’s cylinder – for a mere $40 -or to aim your shoot to the roof – for just $25.
Also, you can walk away at any time. But, if you do it too soon, the audience may feel cheated and shoot you in the back.
After playing the game a few times, the goals of the Remix were clear.
- Show you the available options!
- Change the colors (white text in light blue background, with a green-on-red “CLICK”)
- Add computer players who can get shoot too.
- Translate it to English.
I exported the code to a TXT file, and started editing in Notepad++.
After a while, I moved it to a disk image, and tested it in the “VCC” emulator. It was then that I noticed that text that was supposed to blink, did not blink at all!
Looks like it has been a defect in the emulator that I never noticed before.
So I moved to MAME, kept coding.
After a while, I decided to call it a night. I was, I guess, mostly done.
But when today I was about to start writing this entry, and loaded the disk image… the files had not been saved.
I’m 100% sure I told MAME to mount the disk as “Read – Write”, and even loaded and saved a few times while working. But all is gone now. Just the .BAS file that I wrote in Notepad++ remains.
I guess is back to the keyboard.
I was still going over whether to make the game for a 16 KB or 4 KB CoCo, when I realized that variables are taking quite a lot. And it is understandable, since basically all graphics are stored in alphanumeric variables. With almost 2 KB in variables, and over 2 KB in code… well, there is no room for it in a 4 KB machine.
Therefore, right now, I’m going for a 16 KB machine, with Extended Color Basic, and disk drive. Once I’m done, I’ll rework it for Standard Basic and tape.
Knowing that I had plenty of room, I started adding some nice things.
First, a simple welcome screen, with the hippo moving it’s tongue and blinking.
Then, I made the worm move up as the teeth are being eaten, to keep it “touching” them, by updating the variables that store the position where the worms is printed, every time that a tooth’s piece is eaten.
I’ve also included a not so good version of the game’s intro tune, and the constant “peek-peek-peek” sound, just as in the original game. Somehow, it does not seem that annoying to me. Perhaps because the game is short, or because I’m the one playing it. It will probably annoy the heck out of anyone around… 🙂
And finally, there is a “Game Over” screen, where you are asked if you want to play again. But… the option to play again does not work yet.
In order to go again, I will have to redraw the teeth. But they are not actually drawn in the game, they are part of the background that is loaded form a separate file. And I don’t want to load the file again and again every time that the game is replayed. I got something half figured out, that will (should) take very little additional code. I may try that tomorrow.
Here is a new video of the game.
In the “to-do” list, I have: 1) Improve the sounds and music 2) Get the “Play again” option to work, and 3) Compact the code.
Once everything is ready, I’ll try to get it to work in the more limited Standard Basic, and who knows, seems like porting it to other old micros (C64, Spectrum, etc) should not be that hard…
OK! This was fun!.
Then, yeah, I made it so that only one alien will move in each loop. This, of course speed up the game.
And then I realized that there was a lot of speed being wasted somewhere else.
You see, the aliens and the player are 8×8 sprites. And every time an alien moves, the H and V positions change by 8
350 IF Y*8V(A) AND PPOINT(H(A)+4,V(A)+12)=1 THEN V(A)=V(A)+8
370 IF X*8H(A) AND PPOINT(H(A)+12,V(A)+4)=1 THEN H(A)=H(A)+8
But, for whatever reason, the player’s X and Y change by one, and then the sprite is PUT in X*8, Y*8
140 IF PEEK(341)255 AND Y>0 THEN IF PPOINT(X*8+2,Y*8-6)=1 THEN Y=Y-1
150 IF PEEK(342)255 AND Y0 THEN IF PPOINT(X*8-6,Y*8+2)=1 THEN X=X-1
170 IF PEEK(344)255 AND X<31 THEN IF PPOINT(X*8+10,Y*8+2)=1 THEN X=X+1
This means that every time I PUT, and check for collision, slow multiplication has to be used.
By changing it to work as the aliens already did, everything is again a bit faster.
One of the changes I made caused the aliens not to be drawn until they move. It actually seemed kind of cool, so I left it like that.
And I think that the final change is that the difficulty level now influences how far away from the start is the victim going to be.
Wanting to see how much faster or slower the game was, I used the TIMER variable, which “tics” 60 times in a second. By setting it to 0 at the start of the loop, and printing it at the end, I could get a fairly decent idea of the game’s “framerate”.
The original took from 13 to 20 tics, while the new one took… between 8 and 20!
Success! Not only the game looks and plays a bit better, but it is also faster!
Let’s take a look at the remixed “Aliens”
I hope you like it, at least a bit.
And, in case you are curious, here is the source code for the Remix and for the Original versions.
Well, yesterday I spent a few hours coding the “Hippo Teeth” game, and I was surprised at how easy it all seemed to flow.
After saving the background image as a BIN file, that could be LOADM’d from the main program, I went ahead with creating and animating the “Sprites”.
The player’s controlled Doc can be in just 3 positions, one below each tooth. So I used a variable P to track those. As the graphic of the player is made up of 5 lines of 3 graphic characters each, I also use P$(5) to store the 5 strings. Then another array P(3,5) to store where each of the 5 strings should be printer for each of the 3 possible positions.
That is, when the player is in the 2nd position, I print P$(1) at P(2,1); P$(2) at P(2,2); P$(3) at P(2,3) and so on.
I did the same with the Worm and the Tongue, but for the Smoke, it was a bit more complicated, since it can be in located in a 3×4 grid.
Actually, my first problem was that the game was running too fast!
Each teeth has 40 “life points”, and I was subtracting one for every loop that the worm was under a specific tooth. I had to cut that down to 0.25 for each loop, which actually gives the teeth a life of 160 points.
I made a single change to the game play.
In the original, the tongue could move to “cover” the worm, and stood there, blocking your shoots, while the worm ate the tooth.
Now, if you shoot a “clean” tooth, the tongue may move to that position, leaving the worm open for a shoot.
So far, the game is taking 2570 bytes of memory, and I realized that I’m using some commands that are not in “standard” BASIC (STRING$, TIMER).
I will need to figure out if the game will target a 4 KB machine with tape, or a 16 KB one with Extended BASIC / Disk BASIC.
If I go for the 16 KB machine, I can make some extra animations, and with Extended BASIC, probably nicer sound.
Here is a video of the game after under 3 days of work, with sounds mostly as “placeholders”
And yes, I need to figure out why sometime the smoke cloud is not deleted…
6 years ago, I started to write “Furious Felines”, and 6 months later, it became the most complex game I had written to that date.
It has quite nice high resolution graphics (320×192), the graphics and levels are loaded from individual files, making it easier to maintain, and allowing me to go past some of the memory limitations of BASIC, and people seemed to like it.
I did like it too, but there were some things that I’ve always thought could be improved.
The “wind” was the one that I really did not like, and some of the graphics, specially the trampoline onto which the cats jump, were kind of…. off.
A few weeks ago, I finally made up my mind and starting re-coding it.
And then I could not stop.
I changed the way the wind works, then cleaned up the code, and then added new features, and then improved some sounds, and then improved some graphics, and then… STOP!
If I kept going, instead of version 1.1 it would be 2.0! (And I have plans for a 2.0)
Here is what I finally decided to change / update / add:
Used to be part of the level, loaded into VV, and then modified this way:
It will then affect the cat’s horizontal position by H=H+VV+0.1+LO*0.5
Now, it simply is initialized as VV=RND(3)+1 and then used as H=H+VV+LO
A lot simpler, and always an integer.
Enhanced some graphics.
Since I was redoing the way the wind works, I changed the indicator, from simple “>” characters to actually DRAWn arrow shapes.
The spring onto which always looked to ugly. I’m not sure if it looks any more like a spring as it did before, but at least I gave it some “shading” and color.
In the background, I added a second type of window for the buildings in the background, simply by adding a black cross on top of some of them.
And now there are stars in the sky!
And then… I said to myself: “What the heck, I’ll do it.” and added a change in the gameplay.
I added a new element. A piece of cheese that the mouse will try to steal. This will give the game a sort of time limit, and put some pressure on the player to catch the mouse as soon possible.
Now the mouse had to be able to chew trough the walls. To do this, I just draw a black vertical line ahead of the mouse when it collides with a wall and is pointing to the cheese. This effectively “eats away” a small part of the wall.
By making this change, most of the levels of the original game had to be changed. Just dropping the cheese anywhere would not make it a good level, so I went ahead and updated most of them. As I was at it, I added another 2 levels, for a total of 8. (It is still quite easy to edit the levels file to change them or create new ones)
This, of course, required testing and retesting all levels to make sure they were winnable, even in the second round when the wind is stronger, and also tweaking the screens where the score is shown to make room for the higher scores that are now possible.
With this changes, the game became “Furious Felines 2, Save the cheese”
At this point, the game was almost ready.
The flickering in the cat’s graphics as they flew across the screen annoyed me at some point – it is mostly created by the time the computer needs to draw the cat on the screen – and with the help of the great CoCo community, it got mostly under control.
Finally, I changed a bit the intro’s music – which can be skipped, most of the times, by pressing any key – and added a not very neat way to change the color palette to make it look as it should in a TV or RGB monitor.
Well that should be it.
You can download the game from my CoCo website, where there is some information on how the game works, and how to tweak the levels. There is also a manual, in printable and a PDF versions.
If you try it, please let me know what you think of it.